Home > Parts > Plumbing
Sort By:
Page of 1
Impact drain, 1" OD, Black 3/4" 90 Degree Hose-to-Barb Connector Hose Connector, Qwik-Lok, 3/4", White
Solution for Compartment and Tight Space Drainage
  • UV stable injection molded impact drain
  • Inexpensive part for small drainage holes
  • Very low profile head for complete drainage
  • Small diameter heads to fit in tight locations where drainage is needed
  • Easy to install:  drill hole and pop it in place
  • Size: 1" Diameter, 3/4" Length
Threaded end fits A-Series aerator pump outlets and Tsunami threaded outlets. Male end accommodates Flow-Rite™ Qwik-Lok™ Coupler.

Threaded end fits A-Series aerator pump outlets. Male end accommodates Flow-Rite™ Qwik-Lok™ couplers.

Drain Plug - 1-1/8" Flush Mount Scupper Adapter - White w/Black Flapper Drain Plug - 1-1/2"
Drain Plug - 1-1/8"
Our Price: $7.99
Drain Plug - 1-1/2"
Our Price: $10.99

This Push Plug is used to stop water flow through drains from Baitwell or Livewell. This Black Injection Molded Push Plug features a pull tab for easy removal. It also has a double ring seal.


These flush mount flapper scuppers are designed to mount over a drain tube or to mount directly to a 1 1/2" thru hull with four screws. They feature a "curl proof" flapper. These flappers will retrofit other manufacturers' rubber flapper assemblies

  • Mounts over 1" to 1-1/4" drain tubes
  • Universal hole pattern to replace any defective flapper scupper
  • Grooved inside to fit over drain flanges
  • Attractive complimentary ring and flapper colors
  • Scupper is 2-7/8" and Flapper is 1-1/2"

This Push Plug is used to stop water flow through drains from Baitwell or Livewell. This Black Injection Molded Push Plug features a large ring for easy removal. It also has a double ring seal.


Pump Bracket, Stainless Steel Stainless Steel Screen for 1-1/2" Thru Hull (Screen Only) Hooded Compartment Drain with Barb
Stainless steel bracket for pump

These screw-on stainless steel wire mesh strainers are designed to provide effective, dependable protection against trash or fish scales which could clog drains in bait wells or pump impellers in aeration systems.

Made from formed stainless steel wire mesh cloth and then molded into a PVC base with internal threads this unit is non-corrosive, functional and looks extremely good installed on any boat.

Fits modified 1-1/2" Thru-Hulls

Photograph is of the entire assembly - THIS IS ONLY THE MESH SCREEN - THRU HULL NOT INCLUDED

  • Hooded Compartment Drain with Barb Pipe
  • Nylon Body with 316 Stainless Hood.
  • Suitable for Drainage for Above Waterline Compartments.

Dimensions:
A = 1-7/8"
B = 1-1/2"
C = 3-3/4"
D = 1"
E = 3/4"
F = 1-9/16"
G = 1-5/8"

Stainless Misting Head Stainless Steel Garboard Drain Plug Cockpit Drain, Flat Head
Stainless Misting Head
Our Price: $19.95
Cockpit Drain, Flat Head
Our Price: $19.95
Replacement Stainless Steel Nozzle with rubber o-ring. Threaded removeable plug. Retention system keeps plug from getting lost.
Large 7/8" (27mm) hole for servicing sterndrives.
High polished #316 stainless steel reduces corrosion.
Notched for flush fit. Available in 90 degree and white only. Mounting nut included.
  • Flat head cockpit drain
  • Complete drainage for cockpits
  • Flush fit, snap in screens available
  • For hose size: 1-1/2"
Dimensions:
A - 1-1/2"
B - 2-3/8"
C - 3"
D - 1"
Overflow Drain Tube w/Screen 1-1/2" x 18" Bilge Switch - Attwood S3 Series Aerator Pump - Tsunami T800 GPH
These overflow drain tubes feature a threaded end fitting that screws into a threaded thru hull drain. This means of securing the tube assures that the tube will not come out of the fitting in even the roughest conditions. To drain, simply unscrew the tube. A neoprene gasket provides a water tight seal.
Incorporates a proprietary Electronic Sensing technology to detect bilge water levels and trigger pump activation and has been engineered to operate in any bilge water mixture consistently without failure. Your pump won’t be exposed to continuous cycling as the S3 switch can easily distinguish splashing bilge water, chemicals, sludge build up or foam and comes equipped with fully sealed electronics that are completely protected from water or chemical damage. For added convenience, the bilge switch can be mounted on the floor of the bilge directly to a stringer wall or alongside the basket of the pump without added components or brackets. The S3 Series switch is also directly compatible with all competitive products and free of moving parts that can jam up, break or wear out over time.

With their innovative engineering and compact design, Tsunami pumps deliver high output from a small package. They use the most advanced material available, including the best quality bearings and state-of-the-art brushes, alloys and magnets. The patented shaft seal prevents leaks caused by misalignment and our caulked and tinned wiring eliminates wicking, prevents water damage and resists corrosion.

With their innovative engineering and compact design, Tsunami pumps deliver high output from a small package.

Output & Performance:

  • Move more water and oxygen into livewell tanks to keep fish active
  • Cooler-running motors, premium materials, watertight seals and waterproof wiring
  • Cartridges are replaceable and interchangeable between bilge and aerator pumps
Bilge Pump - Tsunami T1200 GPH Livewell Pump - PIRANHA Livewell 600 Shurflo Upper Housing Kit for Series 4248 & 4258
Boaters, boat-builders and dealers all want one thing from their bilge pumps — more power! And that's what the Tsunami® Series delivers... with high-capacity, high-efficiency output. Tsunami Cartridge pumps have replaceable / interchangeable motor cores. Makes servicing simple and quick.

Wire with Deutsch connector included.

These submersible pumps feature a tough, high-density nylon housing and heavy duty, water cooled, removable motor cartridge for excellent reliability and easy servicing. The dual port fitting allows for easy washdown pump connection. Patented anti-airlock feature allows the pump to clear trapped air.


Shurflo Piranha Livewell Pump, 12 VDC, 600 GPH:

  • Tough, high-density nylon housing
  • Heavy duty, water-cooled, removable motor cartridge for excellent reliability and easy servicing
  • Dual port fitting allows for easy washdown pump connection
  • Patented anti-airlock feature allows the pump to clear trapped air
  • Ignition protected with tinned 6' wire assembly

This is an upper housing for SHURFLO pumps model series 4248 & 4258.

Deck Drain Insert Stainless Scupper Valve Barbed 1-1/2" Bilge Pump - Sahara 750 GPH
Deck Drain Insert
Our Price: $48.00
Used with low profile deck drain in certain models.

3-1/2" Outside Diameter
2" Inside Diameter
3/4" Deep

3" Across (Hole to Hole)
One of the best-looking, long-lasting, toughest Scuppers on the market. The Scupper Flap is tough, flexible material with a molded V-groove to reduce backwash. Fasteners are concealed and corrosion-proof.
  • Includes Solid Silicone gasket
  • Gasket is dimensionally stable, will not deteriorate or shrink over time
  • Excellent resistance to UV & weather-aging
  • Watertight, fool-proof, one-piece seal
  • Eliminates the need to form and apply sealant or caulk

Rugged Stainless Construction

  • Cast from certified #316 Stainless Steel alloy for strength and lifetime corrosion-resistance
  • We polish all visible areas to a mirror finish, then send each part through passivation for additional protection
  • Thick steel sidewalls withstand continual stress and hose flexing

Faster, Simpler Installation

  • A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
  • All sizes have wrench flats to hold as a gripping surface. One installer can tighten all connections from inside the hull
  • Barbed tail ends provide plenty of room to hold multiple clamps
  • Intended for use with 1-1/2" ID exhaust hose and transoms to 3" thick. Use 2" hole saw for installation.

The Sahara has everything contained in one compact yet durable package – pump, wire seals, strainer, and mercury-free switch – and installs quickly and easily in tight spaces. Pumps include 36” lengths of 16-gauge caulked and tinned copper wire.

S750 is sized for larger recreational boats. A powerful 3/4”-outlet automatic pump. 750 GPH* at open flow, 625 GPH* at 3.3’ head. 3/4" hose outlet.

*Listed GPH is measured at design voltage of 13.6 VDC



Bilge Pump - Sahara 1100 GPH Shurflo Macerator Pump (Left) Shurflo Macerator Pump (Right)
The Sahara has everything contained in one compact yet durable package – pump, wire seals, strainer, and mercury-free switch – and installs quickly and easily in tight spaces. Pumps include 36” lengths of 16-gauge caulked and tinned copper wire.

S1100 is a powerful and efficient automatic pump. High capacity for larger boats. 1100 GPH* at open flow, 973 GPH* at 3.3’ head. 1-1/8” hose outlet.

*Listed GPH is measured at design voltage of 13.6 VDC.

Used in Starboard Fish Box.

Designed specifically for the marine environment with run dry premium impeller technology. Capable of 13 gpm, the SHURflo macerator also features a high-quality motor with new seamless shell, splash-proof design and rear o-ring shaft seal. New innovative blade design ensures problem free pumping. The inlet port has both a 1.5" hose barb and 1.5" male thread to screw directly onto a tank flange. Has a 1' outlet barb.

  • Type: Macerating flexible impeller
  • gpm: 13
  • Macerates: Yes
  • Self-Prime: 5'
  • Material: Nylon body, nitrile impeller, stainless wear plate
  • Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb
  • Dimensions: 3-3/8"H x 4-5/8"W x 11"L
  • Innovative blade design ensures problem-free pumping
  • Inlet port has both a 1.5" hose barb and male thread
  • Draw: 12V model: 14A

Used in Port Fish Box and Toilet.

Designed specifically for the marine environment with run dry premium impeller technology. Capable of 13 gpm, the SHURflo macerator also features a high-quality motor with new seamless shell, splash-proof design and rear o-ring shaft seal. New innovative blade design ensures problem free pumping. The inlet port has both a 1.5" hose barb and 1.5" male thread to screw directly onto a tank flange. Has a 1' outlet barb.

  • Type: Macerating flexible impeller
  • gpm: 13
  • Macerates: Yes
  • Self-Prime: 5'
  • Material: Nylon body, nitrile impeller, stainless wear plate
  • Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb
  • Dimensions: 3-3/8"H x 4-5/8"W x 11"L
  • Innovative blade design ensures problem-free pumping
  • Inlet port has both a 1.5" hose barb and male thread
  • Draw: 12V model: 14A

Livewell Fill Pump Kit Shurflo Pro Blaster II Deluxe Washdown Pump (12v)
Livewell Fill Pump Kit
Our Price: $157.50
Replace Your Pirahna 800 With This Powerful System

Kit Includes:
Shurflo 4.0 gpm, 12v pump (1)
Shurflo In-Line Strainer (1)
Shurflo 3/4" Barb Straight Fitting (1)
Shurflo 3/4" Barb Elbow Fitting (1)
The Pro Blaster II Deluxe is perfect for tough washdown applications, such as fish box, scaling, and anchor chain cleaning. These rugged self-priming pumps deliver high lift, can run dry without damage, and won't overheat with extended use. Pumps are ignition protected and switches are sealed against water damage. Includes Blaster nozzle, inlet strainer and fittings that accept 1/2" I.D. hose.

SPECIAL FEATURES:
  • Run dry capability
  • Self priming up to 6'
  • Ignition protected
  • Sealed switch
  • Seamless motor shell w/ Electro-Coat for harsh marine environments